美国EUTECH优特防水型多参数测量仪CD650

产品介绍

产品名称：防水型多参数测量仪

品牌：EUTECH优特

产地：美国

型号：CyberScan CD650

防水型多参数测量仪CD650介绍：

Eutech 的 Cyber​​Scan CD650 配备了先进的实验室仪表，可以同时测量和显示电导率和溶解氧。该仪表具有直观的内置指导提示和故障排除提示，采用先进的无线通信技术，可轻松实现仪表到 PC 的数据传输，并且防水等级为 IP67，适用于恶劣的应用。

防水型多参数测量仪CD650特点：

同时测量和显示三个参数

在宽测量范围内以 3 小数分辨率实现 ±1% 满量程精度

接受两池和四池电导率探头，可测量 500 m/s — 仪表可测量纯水！

可选择的多点校准可实现更准确的电导率测量，或单点校准可实现快速、方便且无错误的校准

测量 90.00mg/L 的溶解氧浓度和 600% 的溶解氧饱和度——当今手持式市场上提供的宽的溶解氧测量范围之一

使用 100% 大气校准选项或 0% 零溶液校准选项快速轻松地进行 DO 校准

盐度、温度和压力补偿——不同条件下的准确读数

电流测量系统无需预热时间

一目了然的屏幕显示，带背光

电极状态报告、校准数据和多达 4 个参数的同时显示

坚固耐用，IP67 级防水，适用于恶劣环境中的应用。仪表浮在水面上！

易于理解的提示信息，便于设置、校准和故障排除

以符合 GLP 的格式记录的读数分别标有时间和日期

自动记录仪表可在几秒钟内自动保存读数以防止数据丢失

HI-LO 限制警报，便于质量控制 – 当读数超出选定范围时，仪表会发出警报

无线信息技术：无需电线，无需电缆——只需按一下按钮，即可将数据从仪表传输到计算机

即使电池耗尽，非易失性存储器也能保护信息和仪表设置

四级密码保护可防止篡改或意外删除数据

校准警报：不再有过时的校准设置

防水型多参数测量仪CD650应用：

环境：测试水质，监测水生生态系统的健康状况，调查地表和地下水饮用水供应，并满足 EPA 规定。

水质检测： 用于分析水硬水、未经处理的水、饮用水、污水、池水和进水工艺用水。适用于所有类型的质量保证和水质测试。

工业： 用于检查金属表面处理、冷却塔水、印刷喷泉解决方案、锅炉水、盐水、冲洗槽、池塘、污染控制、再循环系统、废水和工业过程系统。可用于食品分析和质量保证测试。

水产养殖： 用于监测鲶鱼和虾类养殖中的氧气水平；游戏放养池；观赏鱼缸和池塘；和其他养鱼应用。

防水型多参数测量仪CD650参数：

1.测量参数：电导率/TDS/盐度/电阻率/溶解氧/℃

2.温度

量程:10.0

to 110℃(仪表);0 to 60.0℃(溶解氧电极)

分辨率:0.1℃

精度: ±0.5℃

3.电导率

量程:0 to 2.000μS/cm;2.000 to 300.0μS/cm;300.0μS/cm to 4.000mS/cm;

4.000 to 40.00mS/cm; 40.00 to 500.0mS/cm

分辨率:0.01;0.01μS/cm;0.001,0.01,0.1 mS/cm

相对精度:全量程±1%+1LSD

校正点:自动4 点,手动5 点

电导池常数：0.010 to 10.000

温度补偿系数：线性&纯水

标准温度：15 to 30℃

自动选择量程：是

4.TDS

量程:0 to 2.000 ppm;2.000ppm to 300.0ppm;300.0ppm to 4.000ppt;4.000ppt to 40.00ppt;40.00ppt to 500.0ppt

分辨率: 0.01,0.1ppm;0.001,0.01,0.1ppt

相对精度:全量程±1%+1LSD

TDS 系数:0.40 to 1.0

5.盐度

量程:0 to 0.770 ppm;0.770ppm to 143.3ppm;143.3ppm to 2.138ppt;2.138ppt to 23.64ppt;23.64ppt to 80.00ppt

分辨率: 0.01,0.1ppm;0.001,0.01ppt

相对精度:全量程±1%+1LSD

6.电阻率

量程:2.000Ω to 25.00Ω;25.00Ω to 250.0Ω;250.0Ω to 3.333kΩ;3.333kΩ to 500.0kΩ;500.0kΩ to 20.00MΩ

分辨率: 0.01,0.1,0.001Ω;0.1,0.01MΩ

相对精度:全量程±1%

7.溶解氧

量程:0.00 to 90.00mg/L/ppm

分辨率: 0.01mg/L;0.01ppm

相对精度:±0.2mg/L

校正点：1 点

8.%氧饱和度

量程:0 to 600.0%

分辨率: 0.1%

相对精度:±2.0%

9.盐度补偿

量程:0.0 to 50.0ppt

分辨率: 0.1ppt

方法：自动/手动

10.大气压力补偿

量程:450 to 825mmHg;59.9 to 109.9kPa

分辨率: 0.1mmHg/kPa

方法：自动补偿

11.温度补偿系数:自动/手动(0.0 to 100℃)

12.GLP 标准：符合

13.校正提醒：是

14.IP67 标准：符合

15.数据存储：500 组

16.操作温度：0 到50℃

17.锁定功能：是

18.LCD 显示:背光LCD(5.4*7.1cm)

19.自动关机:2 到30 分钟不操作自动关机

20.输入：DC phono sockets, BNC, 8 针接口

21.输出：IrDA(红外传输), RS232

22.电源:4*1.5 V ‘AAA’碱性电池;9V 稳压电源, 500mA

23.电池寿命:> 200 小时

24.尺寸/重量:18.3cm*9.5*5.7cm/460g(单机); 40cm*33cm*10cm/3200g(装箱)

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

Product Features

Equipped with the sophistication of laboratory meters, Eutech’s CyberScan CD650 allows the simultaneous measurement and display of conductivity and dissolved oxygen. Intuitive with built-in guidance prompts and trouble-shooting tips, the meter comes with advanced wireless communications technology for easy meter-to-PC data transfer, and is IP67 waterproof for harsh applications.

Simultaneously measures and displays three parameters

±1% full scale accuracy at 3-decimal resolution across a wide measurement range

Accepts two-cell and four-cell conductivity probe to measure up to 500 m/s — meter measures pure water!

Selectable multi-point calibration for more accurate conductivity measurements or single-point calibration for quick, convenient calibration with no mistakes

Measures 90.00mg/L in DO concentration and 600% in DO saturation—one of the widest dissolved oxygen measurement ranges offered in the handheld market today

Fast and easy DO calibration with 100% calibration option against atmospheric air or 0% calibration against a zero solution

Salinity, Temperature and Pressure Compensation—accurate readings under varying conditions

No warm up time required with galvanic system of measurement

One-Glance-Tells-All Screen Display with Backlight

Electrode status report, calibration data and simultaneous display of up to 4 parameters

Rugged and IP67-rated waterproof for applications in harsh environments. Meter floats on water!

Easy-to-understand prompt messages for easy set-up, calibration and trouble-shooting

Recorded readings individually stamped with time and date in GLP compliant format

Auto-logging meter saves readings automatically within seconds to prevent data loss

HI-LO limit alarm for easy quality control – Meter alerts when readings fall outside selected ranges

Wireless Information Technology: No wires, no cables—Transfer data from meter to computer with the press of a button

Non-Volatile Memory protects information and meter settings, even when batteries run out

Four Levels of Password Protection prevents tampering or accidental data deletion

Calibration Alarm: No more out-dated calibration settings

Applications

Environmental: Test water quality, monitor health of aquatic ecosystems, survey surface and ground water drinking supplies, and meet EPA regulations.

Water Quality Testing: For analyzing water hard water, untreated water, drinking water, effluent water, pool water and incoming process water. Ideal for all types of quality assurance and water quality testing.

Industrial: For checking metal finishing, cooling tower water, printing fountain solutions, boiler water, brines, rinse tanks, ponds, pollution control, recirculating systems, waste water and industrial process systems. Useful for food analysis and quality assurance testing.

Aquaculture: Use to monitor oxygen levels in catfish and shrimp farming; game stocking ponds; ornamental fish tanks and ponds; and other fish farming applications. 

联系