加拿大Solinst液体测量设备水位计(101B)

品牌：Solinst

产地：加拿大

型号：101B

 

Solinst 101B 水位计采用基本设计，使其成为深度到水位测量的非常经济的选择。101B 使用聚乙烯扁平胶带，以厘米为增量进行热压印。可用的胶带长度为 30 m、60 m 和 100m。坚固的不锈钢 P1 探头直径为 ½" (12.7 mm)。

 

测量水位后，使用Solinst 膀胱泵采集地下水样本。气囊泵确保在运行过程中不会接触空气/水，提供具有代表性的地下水样品和出色的 VOC 样品结果。

Solinst 101B 型水位计旨在成为一种经济、基本但耐用的测量地下水位的仪器。它非常适合测量井、钻孔、立管和水箱中的水深。

 

Solinst 还提供带有激光标记的 PVDF 扁平胶带的标准 101 型水位计和 102 型同轴电缆水位计。这两个选项都允许关闭和灵敏度调整（参见101 型水位计和102 型水位指示器数据表）

 

101B 型水位计使用坚固的不锈钢探头，连接到耐用的聚乙烯扁平胶带。一个标准的 9 伏电池，安装在卷轴轮毂内，为水位计供电。电子元件涂有防水涂层。

 

当探头进入水中时，电路完成，将信号发送回卷轴，在那里会激活灯光和清晰的蜂鸣器。然后通过直接从井套管或钻孔顶部的磁带上读取读数来确定水位。

 

 

101B 型水位计具有坚固的框架和符合人体工程学的手柄，用于缠绕胶带。卷轴上还包括一个制动器。

为方便起见，面板前面还有一个探头支架。

 

 

101B P1 型探头由耐用的不锈钢制成。它旨在减少级联水中的错误信号，并且是防漏的。

尺寸： 12.7 毫米宽，102 毫米长（1/2" x 4"）

有效直径： 16.5 毫米（5/8"）

重量： 100 克（3.53 盎司）

 

101B 型水位计使用高品质聚乙烯扁平胶带，每厘米和每米都有精确的热压印标记。

10 mm (3/8") 宽的磁带卷轴平稳，保持柔韧性，可笔直悬挂在井中，有 30 m、60 m 和 100 m 长度可供选择。

七股不锈钢导体耐腐蚀，提供强度且无拉伸。胶带很容易维修和拼接。狗骨设计减少了对潮湿表面的粘附。

CM3：红色米：每厘米有标记。

长度： 30m、60m 和 100m

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

Solinst 101B Water Level Meters feature a basic design, making them a very economical option for depth to water level measurements. The 101B uses polyethylene flat tape, heat embossed in centimeter increments. Tape lengths available are 30 m, 60 m, and 100m. The robust stainless steel P1 Probe is ½" (12.7 mm) in diameter.

 

Bladder Pumps for Groundwater Samples：

 

Once you've measured your water level, take a groundwater sample using a Solinst Bladder Pump. Bladder Pumps ensure no air/water contact during operation, providing representative groundwater samples and excellent VOC sample results.

 

The Solinst Model 101B Water Level Meter is designed to be an economical and basic, yet durable instrument to measure groundwater levels. It is ideal for measuring depth to water in wells, boreholes, standpipes, and tanks.

 

Also available from Solinst, are the Standard Model 101 Water Level Meters that feature a laser marked PVDF flat tape, and the Model 102 Coaxial Cable Water Level Meters. Both options allow shut-off and sensitivity adjustment (See Model 101 Water Level Meter and 102 Water Level Indicator Data Sheets).

 

Water Level Meter Operating Principles：

The Model 101B Water Level Meter uses a solid stainless steel probe, connected to durable polyethylene flat tape. A standard 9 volt battery, housed inside the reel hub, powers the Water Level Meter. The electronics are coated for water resistance.

 

When the probe enters water, the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

 

Sturdy Reel and Handle：

The Model 101B Water Level Meter has a sturdy frame and ergonomic handle for winding the tape. A brake is also included on the reel.

 

For convenience, there is also a probe holder on the front of the faceplate.

 

Robust, Accurate Probe：

The Model 101B P1 Probe is made from durable stainless steel. It is designed to reduce false signals in cascading water, and is leak-proof.

Size: 12.7 mm wide, 102 mm long (1/2" x 4")

Effective Diameter: 16.5 mm (5/8")

Weight: 100 grams (3.53 ounces)

 

Heat Embossed Polyethylene Flat Tape：

The Model 101B Water Level Meter uses high quality polyethylene flat tape with accurate heat embossed markings every centimeter and meter.

 

The 10 mm (3/8") wide tape reels smoothly, remains flexible, hangs straight in the well and is available in 30 m, 60 m, and 100 m lengths.

 

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. The tape is very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

 

CM3: Meters in red: with markings every centimeter.

Lengths: 30m, 60m and 100m

 

Heat Embossed Markings Each Centimeter