加拿大Solinst液体测量探头式水位计(101 P2)

产品介绍

产品名称：液体测量探头式水位计

品牌：Solinst

产地：加拿大

型号：101 P2

 

潜水探头测量水位和总井深

使用位于探头尖端的传感器进行更一致的测量

Solinst PVDF 扁平胶带提高了抗拉强度和电效率

101 型水位计是便携式手动仪表的行业标准，用于测量井、钻孔、立管和水箱中的水深。它们坚固、易于使用，读数精确到 1/100 英尺或每毫米。

101 P2 型水位计具有易于维修的探头和热压印聚乙烯扁平胶带。

准确的：

每 1/100 英尺或毫米的标记

可溯源至国家标准

灵敏度可调到电导率

探头可避免级联水中的错误读数

 

可靠的：

永久性激光打标

带不锈钢导体的非拉伸 PVDF 扁平胶带

 

长寿：

坚固、防腐蚀的组件

坚固、灵活的胶带

易于拼接和维修

 

灵活的：

PVDF 替换胶带可与其他仪表互换

 

增强的激光标记胶带功能：

 

耐用的 PVDF 非拉伸胶带

改进的电气性能

较厚的狗骨设计可防止粘在井边

每 1/100 英尺或每毫米永久激光打标

 

PVDF 扁平胶带每 1/100 英尺或每毫米激光打标一次；长度可达 5000 英尺 (1500 m)。新的扁平胶带通过在每个导体中使用 6 股镀铜不锈钢和 13 股不锈钢提高了抗拉强度和电气效率。P7 水位计探头经过精心设计，可浸入 1000 英尺（300 m）。探头尖端的传感器在井、钻孔和级联水中提供始终如一的准确测量，位移几乎为零。

 

聚乙烯胶带

101 P2 型水位计使用高品质聚乙烯胶带，卷起顺畅、保持柔韧性并笔直悬挂在井中。每毫米或 1/100 英尺的热压印标记允许准确的读数。3/8" (10 mm) 宽的胶带长度可达 1000 ft. (300 m)。

七股不锈钢导体耐腐蚀，提供强度且无拉伸。它们使胶带非常容易维修和拼接。狗骨设计减少了对潮湿表面的粘附。

M2英尺和十分之一：每 1/100 英尺标记一次。

M3米和厘米：每毫米标记一次

Solinst 聚乙烯胶带设计

狗骨设计可防止胶带粘在井壁上

永久性热压印标记易于阅读

非拉伸胶带在每个导体中使用 7 股不锈钢

每 1/100 英尺或每毫米标记一次

易于修复的胶带

Solinst 101 型 P7 和 P2 水位计可提供如下所示的卷轴，标准长度如下：

小卷轴    100 英尺     30米

             200 英尺    60米

             300 英尺    100米

中卷轴    500 英尺    150米

             750 英尺    250米

            1000 英尺   300米

大卷轴    1250 英尺        400米

             1650 英尺        500米

             2000 英尺        600米

聚乙烯胶带仅提供这些长度

P2水位计探头

P2 水位计探头采用屏蔽设计，以减少或消除级联水中的错误读数。探头由带有氯丁橡胶热缩密封的不锈钢主体组成。它不适合浸没到任何显着深度。其简单的设计使其易于维修。

尺寸： 0.55 英寸直径，7.5 英寸长（14 毫米 x 190 毫米）

重量： ~7 盎司（200 克）

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

101 P7 Submersible Probe measures water levels and total well depth

More consistent measurements with sensor located at the tip of probe

Solinst PVDF flat tape has increased tensile strength and electrical efficiency

 

The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing.

 

Enhanced Laser Marked Tape Features：

 

Durable PVDF non-stretch tape

Improved electrical properties

Thicker dog bone design prevents clinging to sides of the well

Permanently laser marked every 1/100 ft or each mm

 

The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement.

 

With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame.

 

Length Options：

 

Solinst Model 101 P7 and P2 Water Level Meters are available on reels as shown below, in the following standard lengths:

 

Small Reel         100 ft   30 m

                         200 ft   60 m

                         300 ft   100 m

Medium Reel     500 ft    150 m

                         750 ft    250 m

                         1000 ft  300 m

Large Reel          1250 ft   400 m

                          1650 ft   500 m

                          2000 ft   600 m

Polyethylene tapes are only available in these lengths

 

Water Level Meters    Model 101

solinst  water level meters  measure depth of water in wells  water wells  boreholes  depth of water  depth of water in wells  depth of water in boreholes  depth of water in standpipes  water level indicators  water level indicator for piezometer image

 

For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

 

There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF flat tape.

The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene flat tape.

Also available, are the less expensive Model 102 and 102M Coaxial Cable Water Level Meters for use in small diameter tubes, and the basic Model 101B Water Level Meter (see Model 102 and 101B Data Sheets).

 

Features

Accurate:

 

Markings each 1/100 ft. or millimeter

Traceable to national standards

Sensitivity adjustable to conductivity

Probes avoid false readings in cascading water

 

Reliable:

 

Permanent laser markings

Non-stretch PVDF flat tape with stainless steel conductors

 

Long Life:

 

Rugged, corrosion proof components

Strong, flexible tapes

Easy to splice and repair

 

Flexible:

 

PVDF replacement tapes are interchangeable with other meters

 

Laser Marked Flat Tape：

 

Durable, non-stretch PVDF flat tape

Accurately marked each mm or every 1/100 ft

Tape splice option maintained

Certified Traceable to National Standards 

 

PVDF Laser Marked Water Level Tape：

The Model 101 P7 Water Level Meter uses extremely durable, PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency. The tape has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight in application. The tape is also easy to splice.

 

The 3/8" (10 mm) tapes come with permanent laser markings every 1/100 ft. or each millimeter, in lengths up to 5000 ft. (1500 m).

 

LM2: Feet and tenths: with markings every 1/100 ft.

LM3: Meters and centimeters: with markings every mm

 

Operating Principles：

Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery.

 

The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

 

A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

 

Polyethylene Tape：

The Model 101 P2 Water Level Meter uses high quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well. Heat embossed marking each millimeter or 1/100 ft. allow accurate readings. The 3/8" (10 mm) wide tapes come in lengths up to 1000 ft. (300 m).

 

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

 

M2 Feet and tenths: with markings every 1/100 ft.

M3 Meters and centimeters: with markings every mm 

联系