加拿大Solinst水位温度计(201)

产品名称：水位温度计

品牌：Solinst

产地：加拿大

型号：201

 

Solinst 201型水位温度 (WLT) 仪表非常适合测量静态水位，以及井、钻孔、水箱和开放水域的剖面温度。

准确的温度测量值清楚地显示在面板上的 LCD 读数上，范围为 -20ºC 至 +125ºC。

水位和探头深度测量值从 Solinst 耐用的激光标记扁平胶带上读取。胶带长度可达 2000 英尺 (600 m)。

201 水位温度计探头由优质 316 不锈钢制成。耐压探头可以浸没到 1000 英尺 (300 m)。探头上的零测量点靠近尖端，使水位移保持在限度。探头护罩保护传感器尖端。

温度传感器位于探头的不锈钢尖端，但是，由于探头主体充当散热器，因此当探头完全浸没时可以获得精度。如果需要，胶带密封塞设计使探头可以轻松更换。

精确测量 -20ºC 至 +125ºC 的温度

胶带长度可达 2000 英尺 (600 m)

耐用、耐腐蚀、耐化学腐蚀的扁平胶带

标准 9V 碱性电池可使用 90 小时

8分钟后自动关机

坚固的独立卷轴，带有符合人体工程学的手柄和制动器

无需用户校准

 

水温直接影响水生植物和动物的生物活性，以及​​水质和化学的许多方面；因此，它是一个重要的监控参数。

 

井和开放水域的温度分析

检测径流、流入点或其他热污染源

水质变化的早期预警，包括溶解氧水平和电导率

监测和预测水生环境的变化

地热钻探和研究

 

温度范围：    -20.00°C 至 +125.00°C

温度读数精度：    +/-0.10ºC 从 -5ºC 到 +50ºC；

+/-0.50ºC 超出该范围

温度分辨率：    0.01ºC

温度稳定时间：    每 ºC 15 秒

探头压力等级：    可潜水至 1000 英尺 (300 m)。

探头重量：    3.07 盎司（87 克）

探头尺寸：    5/8" 直径，5.08" 长 (16 mm x 129 mm)

接液材料（胶带/探针）：    PVDF、山都平、Delrin、Viton、316 不锈钢

电池寿命：    90 小时

自动关闭：    8 分钟

标准胶带长度：    米：30、60、100、150、250、300 英尺：100、200、300、500、750、1000

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open water.

 

Accurate temperature measurements are clearly displayed on an LCD readout on the faceplate, from -20ºC to +125ºC.

 

Water level and probe depth measurements are read off the Solinst durable laser marked flat tape. Tape lengths are available up to 2000 ft (600 m).

 

Water Level & Temperature Probe：

The 201 Water Level Temperature Meter Probe is made of high quality 316 stainless steel. The pressure-proof probe can be submerged to 1000 ft (300 m). The zero measurement point on the probe is close to the tip, keeping water displacement at a minimum. A probe shroud protects the sensor tip.

 

The temperature sensor is located at the stainless steel tip of the probe, however, since the probe body acts as a heat sink, best accuracy is obtained when the probe is completely submerged. The tape seal plug design allows the probe to be easily replaced, if required.

 

Water Level Temperature Meter Features：

Accurately measure temperature from -20ºC to +125ºC

Tape lengths to 2000 ft (600 m)

Durable, corrosion and chemical-resistant flat tape

Standard 9V alkaline battery gives 90 hours of use

Automatic shut-off after 8 minutes

Sturdy, standalone reel with ergonomic handle and brake

No user calibration is required

 

Water Level & Temperature Applications：

Water temperature has a direct affect on the biological activity of aquatic plants and animals, as well as many aspects of water quality and chemistry; therefore, it is an important parameter to monitor.

 

The Model 201 Water Level Temperature Meter is ideal for:

Profiling temperature in wells and open water

Detecting runoff, points of inflow, or other sources of thermal pollution

Early warning of changes in water quality, including dissolved oxygen levels and conductivity

Monitoring and predicting changes in aquatic environments

Geothermal drilling and studies

 

WLT Meter Specifications：

Temperature range:    -20.00°C to +125.00°C

Temperature reading accuracy:    +/-0.10ºC from -5ºC to +50ºC;

+/-0.50ºC outside of that range

Temperature resolution:    0.01ºC

Temperature stabilization time:    15 seconds per ºC

Probe pressure rating:    Submersible to 1000 ft (300 m).

Probe weight:    3.07 ounces (87 grams)

Probe size:    5/8" dia., 5.08" long (16 mm x 129 mm)

Wetted materials (tape/probe):    PVDF, Santoprene, Delrin, Viton, 316 stainless steel

Battery life:    90 hours

Auto-off:    8 minutes

Standard Tape lengths:    Meters: 30, 60, 100, 150, 250, 300

Feet: 100, 200, 300, 500, 750, 1000