加拿大Solinst探头式水位计(102 P4)

品牌：Solinst

产地：加拿大

型号：102 P4

 

Solinst 102 型水位计用于测量地下水位，尤其是在小直径管和压力计中，或者在需要灵活组件以通过井下仪器的情况下。

 

4 mm (0.157") 或 10 mm (3/8") 直径不锈钢探头

LED灯和响亮的蜂鸣器指示水位

调整灵敏度以适合您的应用

清晰标记的电缆，具有更大的柔韧性和耐磨性

 

激光打标 102 型水位计用于在小直径应用中准确测量地下水位。

102 型水位计采用两种小直径探头设计，连接到窄同轴电缆，安装在符合人体工程学设计的坚固卷轴上。一个标准的 9 伏电池，安装在一个易于取用的电池抽屉中，为水位计供电。

当探头进入水中时，电路完成，将信号发送回卷轴，在那里会激活灯光和清晰可闻的蜂鸣器。然后通过直接从井套管或钻孔顶部的电缆读取读数来确定水位。

灵敏度控制允许蜂鸣器在级联水中按比例缩小或关闭，并确保在高电导率和低电导率条件下都能发出清晰的信号。

 

同轴电缆具有耐用的聚氨酯护套，每毫米或每 1/100 英尺在电缆上精确地激光蚀刻永久性标记。

电缆卷轴平稳，保持柔韧性，长度为 30 m – 300 m (100 ft – 1000 ft)。

编织铜外导体提供柔韧性，绞合不锈钢中心导体提供强度。它易于维修和拼接。

102 型水位指示器探头设计灵活。探头尖端采用嵌入式设计，以**限度地减少级联水中的错误信号。

 

P4： 4 毫米直径。x 38 毫米长（0.157 英寸 x 1.5 英寸）不锈钢重 10 克（0.35 盎司），无砝码。它非常适合浅应用和非常窄的直径，尤其是 Solinst CMT 系统、DrivePoint 渗压计或狭窄开口管的通道。

• 价格低廉的Solinst 品质

 

• 4 mm (0.157") 直径探头

 

• 坚固、耐腐蚀的组件

• 坚固、灵活的电缆易于拼接

• 更换探头、电缆和零件

 

• 每毫米或 1/100 英尺的精确标记

• 可追溯至国家标准

 

标准卷轴具有易于取用的电池抽屉、精心设计的制动组件和方便的提手。它采用人体工程学设计，使用舒适，放置在地面上时稳定。它有一个开/关灵敏度开关、灯、蜂鸣器、电池测试按钮，并带有一个磁带导向器。

 

迷你卷轴坚固，但非常紧凑且易于携带。它还具有开/关灵敏度开关、指示灯、蜂鸣器和电池测试按钮。

 

卷筒工作温度：    -20°C 至 +50°C

电缆/探头的工作温度：    -20°C 至 +80°C

接液材料（电缆/探头）：    聚氨酯、不锈钢、Delrin®、Viton®、聚烯烃（仅限 P10）

卷盘 IP 等级：    IP64（防尘防溅）

电导检测阈值：    P10：40 μS/cm P4：100 μS/cm

 

 

迷你卷轴    25 米      80 英尺

小卷轴       30 米      100 英尺

                 60 米      200 英尺

                 100 米    300 英尺

                 150米     500 英尺

                 250米     750 英尺

                 300米     1000 英尺

带 P4 探头的电缆仅提供这些长度

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

 

Measure Water Level & Draw Down：

4 mm (0.157") or 10 mm (3/8") diameter stainless steel probes

P10 has segmented weights for flexibility

LED Light and loud buzzer indicates water level

Adjust sensitivity to suit your application

Clearly-marked cable with greater flexibility and abrasion-resistance

 

The Laser Marked Model 102 Water Level Indicator is designed to accurately measure groundwater levels in small diameter applications.

 

The Solinst Model 102 Water Level Indicator is designed to measure groundwater levels, especially in small diameter tubes and piezometers, or where a flexible assembly is needed to get past down hole instrumentation.

 

Also available from Solinst, are the Model 101 Water Level Meter and 101B Water Level Meters, which feature easy-to-read, easily repaired flat tape. (See Model 101 Water Level Meter Data Sheets).

 

Operating Principles：

The Model 102 Water Level Meter uses a choice of two small diameter probe designs, attached to a narrow coaxial cable, fitted on a sturdy ergonomically designed reel. A standard 9 volt battery, housed in an easy-access battery drawer, powers the Water Level Meter.

 

When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole.

 

A sensitivity control allows the buzzer to be scaled back or turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

 

Laser Marked Cable：

The coaxial cable has a durable polyurethane jacket with permanent markings precisely laser etched on the cable every each millimeter or every 1/100 ft.

 

The cable reels smoothly, remains flexible, and comes in lengths from 30 m – 300 m (100 ft – 1000 ft).

 

A braided copper outer conductor gives flexibility and a stranded stainless steel central conductor gives strength. It is easy to repair and splice.

 

Narrow Diameter Probes：

 

Model 102 Water Level Indicator Probes are designed for flexibility. The probe tips use a recessed design to minimize false signals in cascading water.

 

P10: 10 mm dia. x 70 mm long (3/8" x 2.75") stainless steel with 10 stainless steel weights, weighing 174 g (6.14 oz). This probe is ideal for the majority of water level measurement applications. The flexible weight assembly allows easy well access and keeps the cable hanging straight in monitoring wells.

 

P4: 4 mm dia. x 38 mm long (0.157" x 1.5") stainless steel weighing 10 g (0.35 oz), with no weights. It is ideal for shallow applications and for accessing very narrow diameters, especially the channels of the Solinst CMT System, DrivePoint Piezometers or narrow open tubes.

 

Water Level Meter Features

Low Cost

• Solinst quality at a low price

 

Narrow

• 4 mm (0.157") diameter probe

 

Long Life

• Rugged, corrosion resistant components

• Strong, flexible cable is easily spliced

• Replacement probes, cables and parts

 

Accurate

• Precise markings every mm or 1/100 ft

• Traceable to national standards

 

Water Level Meter Reels：

The standard reel has an easy access battery drawer, a well designed brake assembly, and convenient carrying handle. It has been ergonomically designed to be comfortable in use and stable when placed on the ground. It has an on/off sensitivity switch, light, buzzer, battery test button, and comes with a tape guide.

 

The mini reel is sturdy, yet very compact and easy to carry. It also has an on/off sensitivity switch, light, buzzer, and battery test button.

 

102 Water Level Meter Specifications：

Operating temperature of reel:    -20°C to +50°C

Operating temperature of cable/probe:    -20°C to +80°C

Wetted materials (cable/probe):    Polyurethane, stainless steel, Delrin®, Viton®, Polyolefin (P10 only)

Reel IP rating:    IP64 (dust and splash proof)

Conductivity detection threshold:    P10: 40 μS/cm P4: 100 μS/cm

 

Cable Length Options：

Solinst Model 102 Water Level Meters are available on reels in the following standard lengths:

 

Mini Reel       25 m     80 ft

Small Reel     30 m    100 ft

                      60 m    200 ft

                     100 m  300 ft

                     150 m  500 ft

                     250 m  750 ft

                     300 m  1000 ft

Cables with P4 Probes are only available in these lengths