加拿大Solinst声光油水界面计(122)

品牌：Solinst

产地：加拿大

型号：122

 

 

Solinst 油/水界面计可清晰准确地测量油井和储罐中的产品液位和厚度。

轻（浮动）非水相液体 (LNAPL) 和稠密（下沉）非水相液体 (DNAPL) 的测定既快速又简单。工厂密封的探头是耐压的（高达 500 psi），胶带的长度范围为 30 – 300 m（100 – 1000 ft）。

直径为 16 mm (5/8") 的探头可轻松进入狭窄的空间和狭窄的井中。该探头设计用于各种监测应用。还提供 122M 迷你接口仪表，请参阅 122M 数据表了解更多信息。

122 型接口仪表已获准在爆炸性环境中使用。它们适用于基于加拿大标准协会 (CSA) 标准的 I 类 1 区 C&D 组危险场所。

带有激光标记胶带的 122 型接口仪现已通过 ATEX 认证，符合指令 94/9/EC，即 II 3 G Ex ic IIB T4 Gc。

当仪表在潜在爆炸性环境中使用时，接地带是安全必需品。它还确保电子设备得到适当的保护。

 

专为恶劣的现场使用而设计

具有自动循环测试的稳定电子设备

激光打标平胶带易去污；抗污渍

胶带使用多股不锈钢和镀铜钢导体：

抗拉强度高；电效率

非拉伸；不腐蚀

坚固的带提手的独立式卷轴

 

传感器精度达 1.0 毫米或 1/200 英尺

经过本质安全认证

16 mm (5/8") 直径探头

易于使用的 9V 电池

5分钟后自动关机

替换磁带可与其他仪表互换

 

P8 探头:

122 Interface Meter 使用直径为 16 mm (5/8") 和不锈钢的 P8 探头。它是耐压的，高达 500 psi。光束从 Hydex 锥形尖端内发射。尖端由一体式不锈钢防护罩保护，非常适合绝大多数产品监控情况。

扁平胶带非常准确，可追溯至 NIST 和欧盟测量标准。

10 mm (3/8") 扁平胶带上易于阅读的标记是永久性激光标记的。狗骨形胶带可避免粘附在井中的潮湿表面上。它耐大多数化学物质，并且表面光滑胶带易于去污且易于处理。

 

LM2：英尺和十分之一：每 1/100 英尺标记一次。

LM3：米和厘米：每毫米标记一次。

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

 

Solinst Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks.

 

Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy. The factory-sealed probe is pressure proof (up to 500 psi) and tapes are available in a range of lengths from 30 – 300 m (100 – 1000 ft).

 

The 16 mm (5/8") diameter probe allows easy access through tight spaces and into narrow wells. The probe is designed for use in various monitoring applications. 122M Mini Interface Meters also available, see 122M Data Sheet for more information.

 

 

Hazardous Locations Use：

Model 122 Interface Meters have been approved for use in explosive environments. They are suitable for use in hazardous locations Class I, Div 1, Groups C&D based on standards of the Canadian Standards Association (CSA).

 

The Model 122 Interface Meter with laser marked tape is now ATEX certified under directive 94/9/EC, as II 3 G Ex ic IIB T4 Gc.

 

The grounding strap is a safety essential when the meter is used in potentially explosive environments. It also ensures that the electronics are properly protected.

 

Accurate, Reliable, Robust：

Designed for rugged field use

Stable electronics with automatic circulatory testing

Laser marked flat tape is easy to decontaminate; resists stains

Tape uses stranded stainless steel and copper coated steel conductors:

high in tensile strength; electrical efficiency

non-stretch; does not corrode

Sturdy free-standing reel with carrying handle

 

Features：

Sensor accuracy to 1.0 mm or 1/200 ft

Certified intrinsically safe

16 mm (5/8") diameter probe

Easy access 9V battery

Automatic shut off after 5 minutes

Replacement tapes are interchangeable with other Meters

 

P8 Probe：

The 122 Interface Meter uses the P8 Probe, which is 16 mm (5/8") in diameter and stainless steel. It is pressure proof, up to 500 psi. The beam is emitted from within a Hydex cone-shaped tip. The tip is protected by an integral stainless steel shield, and is excellent for the vast majority of product monitoring situations.

 

Laser Marked Flat Tape：

The flat tape is extremely accurate, traceable to NIST and EU measurement standards.

 

The easy-to-read markings on the 10 mm (3/8") flat tape are permanently laser-marked. The dog bone shaped tape avoids adherence to wet surfaces in wells. It is resistant to most chemicals, and the smooth surface of the tape is easy to decontaminate and easy to handle.

 

LM2: Feet and tenths: with markings every 1/100 ft.

LM3: Meters and centimeters: with markings every mm.