当前位置:首页 > 测量计量仪器设备 > 长度计量仪器
加拿大Solinst迷你油水界面计(122M)

加拿大Solinst迷你油水界面计(122M)

122M迷你油水界面计带有 PVDF 激光标记电缆的 122M 型迷你接口仪表是 122 型的一个方便的小型版本,可以轻松装入背包中。

货号:S942

型号:122M

联系客服

在线咨询

产品介绍

 产品名称:迷你油水界面计

品牌:Solinst
产地:加拿大
型号:122M
 
122M迷你油水界面计带有 PVDF 激光标记电缆的 122M 型迷你接口仪表是 122 型的一个方便的小型版本,可以轻松装入背包中。
 
Solinst 迷你油/水界面计可清晰准确地测量油井和储罐中的产品液位和厚度。轻(浮动)非水相液体 (LNAPL) 和稠密(下沉)非水相液体 (DNAPL) 的测定既快速又简单。
 
带有激光标记电缆的 122M 型迷你接口仪表是一个方便的小型版本,可以轻松放入背包或可选的定制迷你手提箱中。它使用 25 m 或 80 ft 长的窄激光标记电缆。
 
Mini Interface Meter 增强型电子设备包括自动电路测试;300小时的准时电池寿命;清晰的信号;和高精度。这些电路由一个标准的 9V 电池供电,该电池安装在面板上易于取用的抽屉中。
 
还提供标准的 Solinst 122 型接口仪,带有激光标记的扁平胶带,长度可达 300 m (1000 ft)。
加拿大Solinst迷你油水界面计(122M)

Solinst迷你油水界面计探测:

122M 使用直径为 16 mm (5/8") 和不锈钢的 P8 探头。它是耐压的,高达 500 psi。光束从 Hydex 锥形尖端内发射。尖端受到保护由一个完整的不锈钢防护罩组成,非常适合绝大多数产品监控情况。每个仪表都包含一个清洁刷。
加拿大Solinst迷你油水界面计(122M)

激光打标电缆:

该电缆可溯源至 NIST 和欧盟测量标准。
3 毫米 (0.12") 同轴电缆具有耐用的护套,每毫米或每 1/100 英尺都有永久性激光标记。电缆具有编织铜外导体、绞合不锈钢中心导体和光滑的耐化学腐蚀表面,易于操作去污。
LN2:英尺和十分之一:每 1/100 英尺标记一次。
LN3:米和厘米:每毫米标记一次。
加拿大Solinst迷你油水界面计(122M)

Solinst迷你油水界面计特征:

传感器精度达 1.0 毫米或 1/200 英尺
经过本质安全认证
16 mm (5/8") 直径探头
易于使用的电池:至少 300 小时的使用寿命
具有自动电路测试功能的稳定电子设备
紧凑且易于在背包中运输
专为恶劣的现场使用而设计
 
经营原则:
产品(非导电液体)= 稳定的灯光和色调
 
水(导电液体)=间歇性光和音
 
为了检测液体,122M 型迷你接口仪表使用红外光束和检测器。当探头进入液体时,光束被折射离开检测器,从而激活可听见的音调和光。如果液体是非导电油/产品,则信号是稳定的。如果液体是导电的(水),则水的导电性会形成一个导电回路。这会覆盖红外线电路,并且音调和光线是间歇性的。
 
两个传感器使用完全相同的零点,精度高达 1.0 毫米或 1/200 英尺。高精度使传感器能够检测到水面上轻微的油光。
 
危险场所使用:
带电缆的 122M 型迷你接口仪表已获得 QPS 的批准,可用于基于 CSA 标准的 I 类、Div 1、C&D 组的危险场所。它还通过了指令 94/9/EC 的 ATEX 认证,如 II 3 G Ex ic IIB T4 Gc。
 
当仪表在潜在爆炸性环境中使用时,接地电缆是安全必需品。它还确保电子设备得到适当的保护。
 
中文内容来自机器翻译,内容仅供参考,实际内容可参考原厂介绍或以合同为准。
英文原文:
 
Solinst Mini Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks. Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy.
 
The Model 122M Mini Interface Meter with laser marked cable is a convenient small version, which can easily fit in a backpack or an optional custom mini carry case. It uses narrow laser marked cable in 25 m or 80 ft lengths.
 
The Mini Interface Meter enhanced electronics include automatic circuitry testing; 300 hours of on-time battery life; clear signals; and high accuracy. The circuits are powered by one standard 9V battery housed in easy-access drawer in the faceplate.
 
Also available is the standard Solinst Model 122 Interface Meter with laser marked flat tape in lengths up to 300 m (1000 ft).
 
Probe:
The 122M uses the P8 Probe, which is 16 mm (5/8") in diameter and stainless steel. It is pressure proof, up to 500 psi. The beam is emitted from within a Hydex cone-shaped tip. The tip is protected by an integral stainless steel shield, and is excellent for the vast majority of product monitoring situations. A cleaning brush is included with each Meter.
 
Laser Marked Cable:
The cable is traceable to NIST and EU measurement standards.
 
The 3 mm (0.12") coaxial cable has a durable jacket with permanent laser markings each millimeter or every 1/100 ft. The cable has a braided copper outer conductor, a stranded stainless steel central conductor, and a smooth chemicalresistant surface that is easy to decontaminate.
 
LN2: Feet and tenths: with markings every 1/100 ft.
LN3: Meters and centimeters: with markings every mm.
 
Features:
Sensor accuracy to 1.0 mm or 1/200 ft
Certified intrinsically safe
16 mm (5/8") diameter probe
Easy access battery: minimum 300 hours of life
Stable electronics with automatic circuitry testing
Compact and easy to transport in a backpack
Designed for rugged field use
 
Operating Principles:
Product (Non-conductive liquid) = Steady light and tone
 
Water (Conductive liquid) = Intermittent light and tone
 
To detect liquids, the Model 122M Mini Interface Meters use an infra-red beam and detector. When the probe enters a liquid the beam is refracted away from the detector which activates an audible tone and light. If the liquid is a non-conductive oil/product the signals are steady. If the liquid is conductive (water), the conductivity of the water completes a conductivity circuit. This overrides the infra-red circuit, and the tone and light are intermittent.
 
Both sensors use exactly the same zero point, giving accuracy as good as 1.0 mm or 1/200 ft. The high accuracy enables the sensors to detect the slightest sheen of oil on the surface of the water.
 
Hazardous Locations Use:
The Model 122M Mini Interface Meter with cable has been approved by QPS for use in hazardous locations, Class I, Div 1, Groups C&D based on CSA Standards. It is also ATEX certified under directive 94/9/EC, as II 3 G Ex ic IIB T4 Gc.
 
The ground cable is a safety essential when the meter is used in potentially explosive environments. It also ensures that the electronics are properly protected.

联系

北京恒仪科技有限公司 | 河北恒仪电子科技有限公司

了解 "加拿大Solinst迷你油水界面计(122M)",欢迎新老客户洽谈合作。

产品标签:Solinst   油水界面计   油水界面仪   122M

本站部分内容来自品牌厂商资料或官网翻译,内容仅供参考,资料以最终签订合同为准。

更多产品

搜仪网(so17.cc)

电话:13439104997

邮箱:kf@so17.cc

地址:河北省保定市瑞兴路19号